Tus neeg siv phau ntawv

6
[e-mail]
Mounting The Amplifier
The compact size of the RetroSound® Quadraphonic amplifier enables
considerable installation flexibility. For example, the amplifier may be
placed behind the dash or under the seats. It is best to mount the amplifier
in a location that allows air to freely circulate around it and allows access
to the end panel controls for adjustments. Although both thermal and
overload protection are built in, if the amplifier overheats it will reduce its
power output to maintain operation.
Find a dry, clear and well-ventilated area in which to mount the amplifier.
The area should be free of any obstructions that might block air flow to the
amplifier. It should be protected from exposure to direct sunlight.
You may use the amplifier as a template to mark the four screw locations
with a felt-tip marker. Set the amplifier aside before drilling the mounting
holes. Use caution to make certain there are no objects behind the
installation area that may become damaged by drilling.
If mounting beneath a seat, it is best if there is at least one inch of space
from all sides of the amplifier to allow for proper ventilation. If installing
the amplifier behind the dash, make sure it has at least two inches of
clearance to avoid interference.
Mounting Near The Radio
2” clearance to avoid
interference.
Mounting Under a Seat
1” clearance from all sides
for proper airflow
2”
1”
1”