Owner's Manual

9 WS-MC-2 BASIC CONTROLS
Wet Sounds WS-MC-2 1 Piece Marine Receiver Operations / Installation Manual
PRESETS
Short press the encoder button to access the PRESETS list.
Using this feature allows you to see what PRESETS are saved on
the unit.
ADD PRESETS
Short press the encoder button on the ADD PRESETS option.
You will need to be on both the channel and PRESET group you
want to add rst (SXM1>SXM2>SXM3). Using this feature allows
you to save channels to the unit. Once selected, use the rotary
encoder to select the PRESET number (1-6) you want the channel
saved to.
REMOVE PRESETS
Short press the encoder button on the REMOVE PRESETS option.
You will need to be under the PRESET group you want to adjust
rst (SXM1>SXM2>SXM3). Using this feature allows you to
remove saved channels on the unit. Once selected, use the rotary
encoder to select the PRESET number (1-6) of the channel you
want removed.
CHANNEL
Short press the encoder button on the CHANNEL option to select
this feature. This feature displays a complete listing of channels.
CATEGORY
Short press the encoder button on the CATEGORY option to
select this feature. This feature allows you to search channels
based on their CATEGORY type.
DIRECT TUNING
Short press the encoder button on the DIRECT TUNING option
to select this feature. This feature allows you to directly tune to
a channel if you already know the channel number. Rotate the
encoder until you reach the desired numeral and press to enter
your selection. Repeat until the channel number is completed.