SDS

Safety Data Sheet Product: Styro FP Panels Manufacturer: Styro Industries
2
SECTION 4: CONTINUED FROM PREVIOUS PAGE
SAFETY DATA SHEET
Inhalation Exposure: Remove victim from contaminated area to fresh air. Apply
appropriate first aid treatment as necessary.
Ingestion: Do not feed anything by mouth to an unconscious or convulsive victim.
Specific: Do not induce vomiting. Immediately contact a physician. Dilute contents of
stomach using 3-4 glasses of milk or water.
SECTION 5: FIRE-FIGHTING MEASURES
Flash point: 346 C
Flammable limits: N/A
Auto-ignition Temperature: 492 C
Softening/melting Point: 75 C
Extinguishing media: CO2, foam or dry chemical.
Special Fire Fighting Procedures: Isolate fire and keep people away.
NFPA
Special Fire Fighting Equipment: Wear self-contained positive
pressure breathing and full fire fighting equipment.
Unusual Fire and Explosion Hazards: None
Explosion Data: Not an explosion hazard.
Hazardous Decomposition Products: Dense smoke is produced. Trace amounts of
hydrogen chloride and hydrogen fluoride may be produced.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Minimize the generation of panel dust and avoid the spread of panel dust. Avoid contact
with skin, eyes and clothing. In the presence of fiberglass dust, insure adequate
ventilation. In lieu of adequate ventilation, insure personnel wear approved filter masks
with dust/mist/fume filter cartridges. Evacuate area and keep unnecessary and
unprotected personnel from entering the spill area. Prevent further spillage.
Environmental Precautions: Not applicable.
Methods for containment: Physical means, such as sweeping, are effective.
SECTION 7: HANDLING AND STORAGE
Methods for cleanup: Provide ventilation. Clean up spills or panel debris imm
ediately
while observing precautions in the protective equipment section.
Storage Instructions: Keep panels wrapped or covered while in storage. Store indoors or
under cover in a dry environment out of reach of children and pets.
Handling Instructions: Handle in accordance with good industrial hygiene, normal
material handling and safety practices. Wash after handling.