Owner Manual

5
Check sink pocket positions, and determine where to
glue the bolt plates. Stick the bolt plates underneath the
countertop, then let the bracket adhesive to cure
before applying weight to the bolt plate.
Insert anchors under the countertop on the
drilled holes, so they are ready to fasten the sink flange.
Anchors should be inserted with a hammer until flush.
Clamp the sink and hold in place while adhesive cures.
There are different methods, we suggest using a couple
of pieces of wood with a threaded rod. Set one piece of
wood under the sink and another over the countertop.
Clamp the boards so the sink stays suspended about 1 in
below the countertop. Clean sink flange and
underside of cut-out area of countertop, making sure
that the area is smooth and free of debris. Apply
continuous bead of silicone caulk evenly on top of sink
flange.
Page 3
ENGLISH
Stylish International Inc. www.stylishkb.com stylish.international.inc [e-mail] [phone]
TOLL
FREE
Products and specifications shown are subject to change without notice. Please contact our technical support at [e-mail] for any further queries, replacement parts requests, etc. ©2021 Stylish
®
all right reserved.
INSTALLATION GUIDE
UNDERMOUNT
COMPOSITE GRANITE SINK
Granite Sink
Countertop
Wood Studs
Silicone
Option 1
Option 2
Bolt Plate
Granite
Kitchen Sink
Sink Pocket
Countertop
Clip
Bolt
Nut
Silicone