Use and Care Manual

Assembly

HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

(7d)

(7e)

Fasten strap to back panel

Fasten the safety strap 7a to back panel using

the screw 7c through washer 7b.

Fixing to wall

Drill hole in the wallboard. Tap the wall anchor 7e

into the hole until it is flush. Fasten the safety strap

7a to the wall anchor 7e using the screw 7d

through washer 7b.

For walls constructed of wood with drywall

-with a pencil mark location of holder position

-Drill pilot hole using a 1/8 inch drill bit 2 inches deep

-Attach holder to wall using the 1 inch screw provided

For walls constructed of concrete

-with a pencil mark location of holder position

-Drill pilot hole using a 1/4 inch drill bit 2 inches deep

-Using a rubber mallet or hammer insert wall anchor

into predrilled hole

-Attach holder to wall anchor using 1 inch screw provided

Ask local hardware store for proper

hardware if your wall is constructed

of materials not as listed

Wall