Instructions / Assembly

22
Assembly (continued)
35
Installing the acrylic stopper
□ Remove the paper backing of acrylic stopper (LL), then properly align the acrylic stopper into the cutout on the acrylic stopper
template on the front of the top panel (K). Press down on the acrylic stopper to help adhesion.
□ At the back of top panel (K), grip the heads of plastic tacks with pliers, with twisting motion pull tacks loose to remove the acrylic
stopper template.
NOTE: To prevent your TV from tipping, you must install the acrylic TV stopper if you place a flat panel television on the top panel.
Otherwise, skip to next step.
36
Installing the tipping restraint hardware
WARNING: Young children can be seriously injured by tipping furniture. You must install the tipping restraint hardware with the unit to
prevent the unit from tipping, causing any accidents or damage. The tipping restraints are intended only as a deterrent, they are not a
substitute for proper adult supervision. The tipping restraints are not earthquake restraints. If you wish to add the extra security of earthquake
restraints, they must be purchased and installed separately.
□ With assistance, position the assembled fireplace at the desired location against a wall. If necessary, adjust the pre-attached floor
levelers by hand to correct tilting and level the doors, until the unit is level.
□ Follow the instructions printed on the plastic bag containing the tipping restraint hardware to attach the tip-over restraints to the unit
and the wall.
□ Connect the fireplace to the power transformer. Follow the operating manual for the electric fireplace insert to control your fireplace.
Wall