Instructions / Assembly
21 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Assembly (continued)
33
Finishing fireplace insert assembly
□ The firebox is now ready for the next assemble step.
34
Installing the fireplace insert
□ Lift the fireplace insert carefully into the back of the assembled mantel and center it on the bottom panel in the opening.
□ Use the pilot holes as a guide, fasten two large L-brackets (QQ) onto the firebox support (A1) with four pan head screws (RR). Make
sure that the right angle side is flush with the short edge of firebox support (A1).
□ Use the pilot holes as a guide, fasten the firebox support (Q) between the partition panels (W and X) with four pan head screws (RR).