Manualshelf

Instructions / Assembly

ManualsBrandsStyleWell ManualsElectric FireplacesThorncliff 54 in. Freestanding Electric Fireplace TV Stand in Medium Gray Ash with Charcoal Top
11121314151617181920
14
Assembly (continued)
19
Fastening middle crossbar
□ Using the pilot holes as a guide, attach the small L-bracket (JJ) at the joints where the middle crossbar (Z) meets the partition
panels (W and X) with two short flat head screws (FF) per bracket.
20
Installing back panels
□ Now, go back and securely tighten all the cam locks and screws. Make sure all the parts are tight and there are no gaps between
the parts. This will help keep the unit square.
□ Pick up the upper back panel (D1) and align the pre-drilled holes against the upper long edge with the pilot holes on the back of
top panel (K). Fasten it in place with the provided washer head screws (II).
□ Using the pilot holes as a guide, align and attach the side back panels (B1) to the mantel frame with the washer head screws (II).
NOTE: We recommend attaching back panel with the screws at the corners first.