007519970/320010627/611768149018/23WM90536-PC78 319988351/611768150427/23WM90536-PB01 319988496/611768150434/23WM90536-PT01 319988258/611768150458/23WM90536-TPG22 319988256/611768150441/23WM90536-TPT01 USE AND CARE GUIDE WHEATON ELECTRIC FIREPLACE Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.
Table of Contents Maximum Load Warning............................................ 2 Safety Information...................................................... 3 Warranty...................................................................... 5 Pre-Assembly.............................................................. 6 Hardware Included ................................................... 6 Product Specifications........................................................ 6 Tools Required.........................
Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any question regarding the product, please call customer service at 1-877-527-0313, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons including the following: 1. 2. 3. 4. 5. 6. 7. 8.
Safety Information (continued) NOTE: Use care in assembling your new fireplace. Take your time and use the hardware provided and a quality Phillips head screwdriver. Never overtighten bolts. Do not sit on any part of the mantel. It is recommended to work on a soft surface like a rug or to lay out a blanket to protect the furniture from getting scratched during the assembly process.
Warranty Warranty 1 Year Limited Warranty: The manufacturer warrants that your new Electric Fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. 1. Install and operate this appliance in accordance with the installation and operating instructions furnished with the product at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.
Pre-Assembly HARDWARE INCLUDED BB AA Part CC DD EE FF HH GG II JJ KK LL Description Part Number AA Screw- 3 x 12 mm PH-SCRBLK007 Quantity 4 BB Screw- 3.5 x 12 mm PH-SCRBLK013 7 6 CC Cam Bolt PH-KDBZNC001 DD Cam Lock PH-KDCZNC001 6 EE Bolt- 4 x 12 mm PH-BLTZNC013 4 FF Philip Bolt- 6.
Pre-Assembly (continued) PACKAGE CONTENTS NOTE: All panels are labeled left and right as viewed from the front of unit.
Assembly 1 Attaching the wire clips JJ Insert the Wire Clip (JJ) into the pre-drilled holes in the Right Surround Panel (E), pushing them in by hand. E the left and right surround 2 Attaching panels to the upper front panel Align the pre-installed dowels in Upper Front Panel (F) with the pre-drilled holes on the Left and Right Surround Panels (D and E). AA LL Flip the Pre-attached Metal Plates (LL) up, as shown. Insert Screws (AA) into the pre-drilled holes. Tighten with the Phillips screwdriver.
Assembly (continued) 4 Placing the electric fireplace glass front Locate the Glass Panel (L). Carefully insert the Glass Panel (L) into the grooves of the surround rails as shown. Slide all the way in until the glass meets the bottom of the Front Panel with Control Button (EA). EA L 5 Preparing base for assembly Locate the Base Front Rail (H). CC Place the Base Front Rail (H) on a flat surface and insert four Cam Bolts (CC) as shown.
Assembly (continued) 7 Attaching the base back rail Align the Cam Lock (DD) on the edge of Base Back Rail (I) with the pre-drilled holes on Bottom Shelf (A). fastener Secure the Base Back Rail (I) in place by tightening the fasteners with a Phillips screwdriver as shown. I A 8 Attaching the sides to the base Align the pre-installed hardware on the edges of the Base Assembly (A and I) with the pre-drilled holes on the Left and Right Side Panels (B and C) as shown in the diagram.
Assembly (continued) 10 Securing the base Insert the Cam Locks (DD) over the Cam Bolt (CC). Tighten with a Phillips screwdriver to tighten the cam locks and secure the base. DD CC 11Attaching the left and right side partitions Align the pre-installed hardware on the edges of the Left and Right side partitions (J and K) with the pre-drilled holes. Secure the Left and Right Side Partitions to the front assembly by tightening the fasteners with a Phillips screwdriver as shown.
Assembly (continued) 12 Preparing the top panel Insert Cam Bolt (CC) into the pre-drilled holes in the Top Panel (G) using a Phillips screwdriver. CC G 13 Attaching the top panel Align the pre-installed hardware on the edges of the main assembly with the pre-drilled holes in the Top Panel (G). Secure the Top Panel to the front assembly by tightening the fasteners with a Phillips screwdriver as shown.
Assembly (continued) 14 big hole Attaching the insert brackets EE Locate the Brackets (EF) and secure to each side of the Heater Box (EB) using Bolts (EE). small hole EF EF EB 15 Installing the fireplace heater J Secure the Heater Box (EB) in place by screwing Screws (FF) through the holes in the Brackets (EF) and into pre-drilled holes in the Left and Right side partitions (J and K) from Step 11.
Assembly (continued) 17 Assembling the log set EC ED EG Route the wires of the Log Set Left (EC) and the Log Set Right (ED) down the back of the Ember Bed (EG) and into the receiving tabs to secure in place. Refer to the lower diagram. Gently plug the cords from both the Log Set Left (EC) and the Log Set Right (ED) into the ports as shown. Ensure the cords are plugged in straight.
Assembly (continued) 20 Connecting the fireplace wiring Connect Key Button Connection Wire to heater. Insert the Ember Bed Connection Wire into the heater. Key Button Connection Wire Ember Bed Connection Wire 21 Placing the fireplace background Locate the Electric Fireplace Back Panel (M). Only slightly bend the wallpaper and fit it into the back of the fireplace. M Note that this back panel is reversible and can be placed with either side facing the fireplace insert for a customizable look.
Assembly (continued) 23 Installing the tipping restraint hardware When the Tipping Restraint Hardware (II) is properly installed, it can provide protection against unexpected tipping of the Unit due to small tremors, bumps or climbing. Each Tipping Restraint Hardware (II) includes one Unit Anchor, one Wall Anchor, one Anchor Tether, and four Anchor Screws. Use these to complete the following steps for a proper installation. Locate a secure wall stud behind the unit closest to the left side.
Operation Operation NOTE: The control panel can be accessed at the upper-right corner of the insert. 1 Powering the fireplace 2 Push the Power button to supply power to all functions of the fireplace and put the insert in a standby mode. Push the Power button again to turn off all functions. Adjusting the flame There are 5 brightness levels that can be selected and OFF (00) setting. Settings F5 - F1 decrease in brightness.
Operation (continued) 6 Replacing the remote control battery 7 Disposing of used batteries The battery may contain hazardous substances that could endanger the environment and human health. When the remote control stops operating or its range seems reduced, it is time to replace the batteries with new ones. On the back end of the remote, press and slide the battery door open and remove the old battery.
Operation (continued) 8 Power cord information This heater is for use on 120 volts. The cord has a plug as shown in the figure. Connect to properly grounded outlets only. Do not use a two-prong adapter. Never use with an extension cord or relocatable power tap (outlet/ power strip). 9 Patented Safer Plug® information This product is equipped with a Safer Plug®, which is an advanced safety device that helps prevent electrical fires caused from faulty outlets.
FCC/IC Information WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Troubleshooting PROBLEM ROOT CAUSE CORRECTIVE ACTION Fireplace has reached set temperature. Fireplace stopped heating before reaching Temperature around fireplace might be a few the desired temperature. degrees higher than other area in the room. Set the fireplace to a higher temperature or always “on”. Display shows " " The thermostat sensor is broken or disconnected. Unplug the fireplace, remove the back panel of the fireplace and check that the thermostat is plugged into the main circuit board.
Troubleshooting PROBLEM The remote control is not working. ROOT CAUSE CORRECTIVE ACTION There are no batteries. Change the remote batteries. The signal is poor. Operate remote transmitter at a slow measured pace. Press the remote control buttons with an even motion and gentle pressure. Repeatedly pressing buttons in rapid succession may cause the transmitter to malfunction. The remote is too far from the heater.
Replacement Parts For replacement parts, call our customer service department at 1-877-527-0313, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. Part Description Qty.
Notes 24
Questions, problems, missing parts? Before returning to the store, call StyleWell Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
