007529350/319988354/611768148929/32WM717-PM93 USE AND CARE GUIDE 43-IN. MEDIA MANTEL WITH 32-IN. 3D INSERT Questions, problems, missing parts? Before returning to the store, call StyleWell Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in StyleWell through the purchase of this electric fireplace.
Table of Contents Maximum Load Warning............................................ 2 Safety Information...................................................... 3 Warranty...................................................................... 5 Pre-Assembly.............................................................. 6 Hardware Included ................................................... 6 Product Specifications........................................................ 6 Tools Required.........................
Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any questions regarding the product, please call customer service at 1-877-527-0313, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons including the following: 1. 2. 3. 4. 5. 6. 7. 8.
Safety Information (continued) NOTE: Use care in assembling your new fireplace. Take your time and use the hardware provided and a quality Phillips head screwdriver. Never overtighten bolts. Do not sit on any part of the mantel. It is recommended to work on a soft surface like a rug or to lay out a blanket to protect the furniture from getting scratched during the assembly process.
Warranty Warranty 1 Year Limited Warranty: The manufacturer warrants that your new electric fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. 1. Install and operate this appliance in accordance with the installation and operating instructions furnished with the product at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.
Pre-Assembly HARDWARE INCLUDED AA BB CC DD EE FF GG HH JJ KK LL MM NN OO PP QQ Part II Description Part Number AA Screw- 4 x 50 mm PH-SCRBLK006 Quantity 2 BB Bolt- 6.
Pre-Assembly (continued) PACKAGE CONTENTS NOTE: All panels are labeled left and right as viewed from the front of unit.
Assembly 1 Constructing the Center Assembly Align the pre-installed hardware on the ends of the Fixed Shelf (D) and the Front Rail (E) with the pre-drilled holes in the Left and Right Side Panels (B and C). Attach the Side Panels to the Fixed Shelf (D) and the Front Rail (E) as shown, using a Phillips screwdriver. C E B D 2 Securing the Fixed Shelf C E Using Screws (AA) through the Fixed Shelf (D) and into the pre-drilled holes on the Left and Right Side Panels (B and C) as shown.
Assembly (continued) 4 Attaching the Feet BB Attach the Feet (H) to the Panel (A) using the Bolts (BB) and Washers (CC), as shown. Tighten bolts with a Phillips screwdriver as shown. CC H H H H A 5 Attaching the Main Assembly to the Base Attach the previously constructed main assembly to the Base (A), inserting the pre-installed hardware on the edges of the main assembly into the pre-drilled holes in Base (A).
Assembly (continued) 7 Attaching the Top Panel Place the Top Panel (G) onto the main assembly by aligning the pre-installed hardware with the pre-drilled holes. From underneath, tighten the hardware as shown, using a Phillips screwdriver. G 8 Securing the Back Panel Place the Back Panel Brackets (EE) between the back panels and the grooves of the assembly as shown. Fasten each Back Panel Bracket (EE) using Screws (FF). Repeat until all brackets are in place as indicated by the diagram.
Assembly (continued) 10 Inserting the Drawer Bottom Panel K Place the Drawer Bottom Panel (L), sliding it between the grooves in the Left and Right Drawer Panels (J and K) until it meets the Drawer Back Panel (I). L J 11 Attaching the Drawer Bottom Support Rail HH Insert Wood Dowels (HH) into the pre-drilled holes in one end of the Drawer Bottom Support Rail (M). Then attach the Drawer Bottom Support Rail (M) to the Drawer Back Panel (I), using Screws (GG) and a Phillips screwdriver as shown.
Assembly (continued) 13 GG Attaching the Drawer Front Panel Align the Drawer Front Panel (N) with the edges of the drawer assembly, making sure the previously installed wood dowel and Cam Lock Screw (from Steps 11 and 12) align with the correct pre-drilled holes. Attach the Drawer Front Panel (N), to the drawer assembly by inserting Screws (GG) as shown.
Assembly (continued) 16 Inserting the Drawer OO Extend the pre-installed Drawer Slider (OO) from the sides of the cabinet and insert the slides from the drawer into the cabinet Drawer Slider (OO). 17 Removing the Brackets Unscrew these screws and take the left and right side pre-installed Brackets (QQ) off. QQ 13 HomeDepot.com Please contact 1-877-527-0313 for further assistance.
Assembly (continued) 18 Installing the Fireplace Insert Lift the Fireplace Insert (O) carefully into the back of the unit and center in the fireplace insert opening. Do not drag the fireplace insert across the base as it may scratch your unit. O 19 Securing the Fireplace Insert Reattach the Brackets (QQ) to secure the Fireplace Insert (O), using the included hardware and a Phillips screwdriver.
Assembly (continued) 20 Installing the Tipping Restraint Hardware When the Tipping Restraint Hardware (LL) is properly installed, it can provide protection against unexpected tipping of the unit due to small tremors, bumps or climbing. Each Tipping Restraint Hardware (LL) includes one Unit Anchor, one Wall Anchor, one Anchor Tether, and four Anchor Screws. Use these to complete the following steps for a proper installation. Locate a secure wall stud behind the unit closest to the left side.
Operation Operation NOTE: The control panel can be accessed at the upper-right corner of the insert. 1 Powering the Fireplace 2 Push the Power button to supply power to all functions of the fireplace and put the insert in a standby mode. Push the Power button again to turn off all functions. Adjusting the Flame There are 5 unique Spectrafire flame effects that can be selected: Spectrafire Sapphire Amethyst Camp-fire Midnight Fire AU: Auto Cycle will seamlessly cycle through the above flame colors.
Operation (continued) 5 Adjusting the Flame Speed 6 Each flame color option has speed options available. Setting S1 is slowest ranging up to setting S5 which is the fastest. Flame Brightness Each flame color option has 5 intensity options available. 7 Replacing the Remote Control Battery 8 Disposing of Used Batteries When the remote control stops operating or its range seems reduced, it is time to replace the batteries with new ones.
Operation (continued) 9 Power Cord Information This heater is for use on 120 volts. The cord has a plug as shown in the figure. Connect to properly grounded outlets only. Do not use a two-prong adapter. Never use with an extension cord or relocatable power tap (outlet/ power strip). 10 Patented Safer Plug® Information This product is equipped with a Safer Plug®, which is an advanced safety device that helps detect electrical fires caused from faulty outlets.
FCC/IC Information WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Troubleshooting PROBLEM Fireplace stopped heating before reaching the desired temperature. ROOT CAUSE CORRECTIVE ACTION Fireplace has reached set temperature. Temperature around fireplace might be a few degrees higher than other area in the room. Set the fireplace to a higher temperature or always “on”. Display shows " " The thermostat sensor is broken or disconnected. Unplug the fireplace, remove the back panel of the fireplace and check that the thermostat is plugged into the main circuit board.
Troubleshooting (continued) PROBLEM Flame effect works but heater function does not and the emberbed flashes when the Heater button is pressed. ROOT CAUSE CORRECTIVE ACTION The heater is disabled. With the power on press and hold the power button on the control panel for 10 seconds. Once re-enabled the emberbed lights will flash multiple times. There are no batteries. Change the remote batteries. The signal is poor. Operate remote transmitter at a slow measured pace.
Replacement Parts For replacement parts, call our customer service department at 1-877-527-0313, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. Part Description Qty.
Notes 23 HomeDepot.com Please contact 1-877-527-0313 for further assistance.
Questions, problems, missing parts? Before returning to the store, call StyleWell Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
