Installation Guide

6
ASSEMBLY INSTRUCTIONS
Prepare wires by stripping 3/4 in. of insulation from
wire ends using wire strippers (not included).
Connect WHITE wires from fixture (A) to WHITE wire
from outlet box using existing wire connector or wire
connector (AA). Connect BLACK wires from fixture
(A) to BLACK wire from outlet box using existing wire
connector or wire connector (AA). Connect
BARE/GREEN ground wire from outlet box to BARE
wire from fixture (A) using wire connector (AA).
NOTE: Screw wire connectors (AA) on in a clockwise
direction.
WARNING: Never connect BARE/GREEN
ground wire to WHITE or BLACK power supply
wires.
WARNING: To reduce the risk of fire, electrical
shock or personal injury, wire connectors provided
with this light fixture are designed to accept only one
12-gauge house wire and two lead wires from the
light fixture. If your house wire is larger than
12-gauge or there is more than one house wire to
connect to the corresponding fixture lead wires,
consult an electrician for the proper size wire
connectors to use.
Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire.
WARNING: Make sure no bare wire or wire
strands are visible after making connections.
6
5.
6.
x 3
Hardware Used
E3 Wire Connector
AA
Lowes.com
5
Outlet
Box
WHITE
BLACK
BARE/
GREEN
AA
AA
A
AA
BARE
Outlet
Box
AA
AA
A
AA