Installation Guide

8.
9.
7 .
Attach fixture (A) to mounting plate (B) using the
screws (C) previously removed (Step 3, Page 6).
Note: Before tightening screws (C) completely,
use level (not included) to check fixture (A).
Adjust if necessary.
NOTE: Fixture (A) can be installed with the
socket facing either up or down.
Remove socket ring (D) from socket of fixture
(A). Attach shade (sold separately) to the socket
using socket ring (D).
WARNING: Do not overtighten socket ring (D)
as shade may crack or break.
Install one 60-watt max. standard-base
incandescent bulb (not included) or CFL/LED
equivalent.
WARNING: When replacing bulb, allow
bulb, shade and fixture to cool down before
touching.
Restore power and test fixture (A).
If lights do not function, please refer to
TROUBLESHOOTING.
8
ASSEMBLY INSTRUCTIONS
8
9
Bulb
Shade
(representative only)
D
A
7
A
C
C
B
C
C
A