Installation Guide

7
6.
5.
Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire.
Push wire connectors (AA) gently back into outlet
box. Carefully push excess wiring into outlet box.
WARNING: Make sure no bare wire or wire
strands are visible after making connections.
Unwrap BARE wire from BLACK and WHITE
wires. Prepare wire by stripping 3/4 in. of insulation
from wire ends using wire strippers (not included).
Connect WHITE wire from fixture (A) to WHITE
wire from outlet box using existing wire connector
or wire connector (AA). Connect BLACK wire from
fixture (A) to BLACK wire from outlet box using
existing wire connector or wire connector (AA).
Connect BARE/GREEN ground wire from outlet
box to BARE ground wire from fixture (A) with wire
connector (AA).
NOTE: Screw wire connectors (AA) on in a
clockwise direction.
WARNING: Never connect ground wire to
WHITE or BLACK power supply wires.
WARNING: To reduce the risk of fire, electrical
shock, or personal injury, wire connectors (AA)
provided with this light fixture are designed to
accept only one 12-gauge house wire and two lead
wires from the light fixture. If your house wire is
larger than 12-gauge or there is more than one
house wire to connect to the corresponding fixture
lead wires, consult an electrician for the proper
size wire connectors to use.
ASSEMBLY INSTRUCTIONS
x 3
Hardware Used
Wire Connector
AA
Outlet
Box
6
AA
AA
AA
5
Outlet
Box
WHITE
GREEN/
BARE
BLACK
AA
AA
AA
A