Installation Guide

6
ASSEMBLY INSTRUCTIONS
Hardware Used
Machine Screw
x 2
BB
Remove mounting plate (B) from fixture (A) by
removing screws (C) from the edges of the
fixture (A).
Save screws (C) for later use.
3.
C
3
A
B
C
Attach mounting plate (B) to outlet box
(not included) using existing washers and
outlet box screws or the machine screws
(BB). NOTE: If the outlet box screws
required for your outlet box are of a different
size than the machine screws (BB), consult
a licensed electrician before proceeding.
Tighten machine screws (BB) to secure
mounting plate (B).
CAUTION: The fixture must be mounted
to an outlet box that is supported by the
building structure. Plastic outlet boxes are
not recommended.
4.
4
Outlet Box
Washers
B
BB
BB