Installation Guide

ASSEMBLY INSTRUCTIONS

Prepare wires by stripping 3/4 in. of insulation from

wire ends using wire strippers (not included).

Connect WHITE wire from fixture (A) to WHITE wire

from outlet box using existing wire connector or wire

connector (AA). Connect BLACK wire from fixture (A)

to BLACK wire from outlet box using existing wire

connector or wire connector (AA).

Connect BARE/GREEN ground wire from outlet box

to BARE ground wire from fixture (A) with wire

connector (AA).

NOTE: Screw wire connectors (AA) on in a clockwise

direction.

WARNING: Never connect ground wire to

WHITE or BLACK power supply wires.

WARNING: To reduce the risk of fire, electrical

shock or personal injury, wire connectors (AA) are

designed to accept only one 12-gauge house wire

and two lead wires from the light fixture. If your

house wire is larger than 12-gauge or there is more

than one house wire to connect to the corresponding

fixture lead wires, consult an electrician for the

proper size wire connectors to use.

Hardware Used

Wire Connector

x 3

BLACK

WHITE

BARE/

GREEN

Attach mounting plate (B) to outlet box

(not included) using existing washers and outlet

box screws or the machine screws (BB).

NOTE: If the outlet box screws required for

your outlet box are of a different size than the

machine screws (BB), consult a licensed

electrician before proceeding. Tighten machine

screws (BB) to secure mounting plate (B).

CAUTION: The fixture must be mounted to

an outlet box that is supported by the building

structure. Plastic outlet boxes are not

recommended.

Hardware Used

Machine Screw

x 2

Outlet Box