Installation Guide

8
ASSEMBLY INSTRUCTIONS
6.
Wrap electrical tape (not included) around each
individual wire connector (AA) down to the
wire.
WARNING: Make sure no bare wire or wire
strands are visible after making connections.
Carefully push excess wiring and wire
connectors (AA) gently back into outlet box.
6
AA
A
AA
AA
Outlet
Box
7.
Attach fixture (A) to mounting plate (B) using
the mounting plate screws (C) previously
removed (Step 3, Page 5).
NOTE: Before tightening mounting plate
screws (C) completely, use a level to check
fixture (A) -- adjust if necessary.
Restore power and test fixture (A).
If lights do not function, please refer to
TROUBLESHOOTING on the following page.
8.
8
A
C
7
B
A
C
C