Installation Guide

ASSEMBLY INSTRUCTIONS

Attach fixture (A) to mounting plate (B) using

the mounting plate screws (C) previously

removed (Step 3, Page 6).

NOTE: Before tightening mounting plate

screws (C) completely, use level (not included)

to check fixture (A) -- adjust if necessary.

NOTE: Fixture (A) can be installed with the

sockets facing either up or down.

Restore power and test fixture (A).

If lights do not function, please refer to

TROUBLESHOOTING.

CARE AND MAINTENANCE

• Shut off main power supply. Wipe with soft cloth or use window cleaner. Do not use an abrasive

cleaner.

• Total wattage for this fixture is 25 watts; do not attempt to replace the LEDs.