Installation Guide

6
ASSEMBLY INSTRUCTIONS
Remove mounting plate (B) from fixture (A) by
removing mounting plate screws (C) from the
edges of the fixture (A).
Save mounting plate screws (C) for later use.
3.
B
3
C
A
C
C
Attach mounting plate (B) to outlet box
(not included) using existing washers and outlet
box screws or the machine screws (BB).
NOTE: If the outlet box screws required for
your outlet box are of a different size than the
machine screws (BB), consult a licensed
electrician before proceeding. Tighten machine
screws (BB) to secure mounting plate (B).
CAUTION: The fixture must be mounted to
an outlet box that is supported by the building
structure and can support the weight of the
fixture. Plastic outlet boxes are not
recommended.
4.
Hardware Used
Machine Screw
x 2
BB
4
Outlet Box
B
BB
BB