Installation Guide

ASSEMBLY INSTRUCTIONS
5
Remove mounting plate (C) from fixture (A) by
removing mounting plate screws (B) from the
fixture (A).
Save mounting plate screws (B) for later use.
Attach mounting plate (C) to outlet box (not
included) using existing washers and outlet box
screws or the machine screws (BB). NOTE: If the
outlet box screws required for your outlet box are
of a different size than the machine screws (BB),
consult a licensed electrician before proceeding.
Tighten machine screws (BB) to secure mounting
plate (C).
Note: The mounting plate (C) can be installed
either vertically (shown) or horizontally.
CAUTION: Make sure the outlet box can
support 35 lbs. hanging weight. Use metal outlet
box; plastic outlet boxes are not recommended.
3.
4.
Hardware Used
Machine Screw
x 2
BB
4
Outlet Box
C
BB
BB
3
C
A
B
B