Installation Guide

ASSEMBLY INSTRUCTIONS
6
Remove mounting plate (B) from fixture (A) by
removing mounting plate screws (C) from the
edges of the fixture (A).
Save mounting plate screws (C) for later use.
Attach mounting plate (B) to outlet box
(not included) using existing washers and
outlet box screws or the machine screws
(BB). NOTE: If the outlet box screws
required for your outlet box are of a different
size than the machine screws (BB), consult
a licensed electrician before proceeding.
Tighten machine screws (BB) to secure
mounting plate (B).
CAUTION: The fixture must be mounted
to an outlet box that is supported by the
building structure. Plastic outlet boxes are
not recommended.
3.
4.
B
Hardware Used
Machine Screw
x 2
BB
4
Outlet Box
B
BB
BB
3
C
A
C