Installation Guide

8
Lowes.com/
p
ortfolio
ASSEMBLY INSTRUCTIONS
8.
8
Remove socket rings (C) from sockets of fixture
(A). Attach glass shades (sold separately) to
sockets, securing with socket rings (C).
CAUTION: Do not overtighten socket rings
(C) as glass may crack or break.
Glass Shade
(representative only)
C
A
Install three standard-base bulbs (not included).
Use either 60-watt max. incandescents or
13-watt CFLs.
WARNING: When replacing bulbs, allow
bulbs, glass shades and fixture to cool down
before touching.
Restore power and test fixture (A).
If lights do not function, please refer to
TROUBLESHOOTING on the following page.
9.
9
Glass Shade
(representative only)
Bulb
A
Outlet
Box
7.
Align holes in fixture (A) with screw holes in
mounting plate (B) and push fixture (A) toward
wall. Attach fixture (A) to mounting plate (B) using
the mounting plate screws (D) previously removed
(Step 3, page 5). Note: Fixture (A) can be
installed with the sockets facing either up or down.
7
B
A
D
D