Installation Guide

Lowes.com/

ortfolio

ASSEMBLY INSTRUCTIONS

Hardware Used

Wall Anchor Screw

x 2

To mount the item directly to wall, determine the

approximate location for the fixture (A). Place the

mounting plate (B) against the wall and mark the

location of the slots on the mounting plate (B) using

a pencil or a marker (not included). Set mounting

plate (B) aside.

Then, using a 1/8 in. drill bit (not included), drill two

pilot holes at the marked locations. Gently tap wall

anchors (DD) into holes with a hammer (not

included) until flush with wall surface.

Use a level (not included) to adjust mounting plate

(B) parallel with floor and ceiling as needed. Secure

mounting plate (B) to wall with wall anchor screws

(CC).

CAUTION: To mount to wall without an outlet

box, proper wiring for a light fixture must be present

and/or accessible. If not, consult a qualified

electrician before installing the fixture.

4b.

Wall

Pre-drilled holes

Wall Anchor

x 2