Installation Guide

Remove mounting plate (B) from fixture (A) by

removing mounting plate screws (D) from the edges

of the fixture (A). Save mounting plate screws (D)

for later use.

To mount the item directly to an outlet box (not

included), first attach mounting plate (B) to outlet

box using the existing washers and outlet box

screws or the machine screws (BB). Note: If the

outlet box screws required for your outlet box are of

a different size than the machine screws (BB),

consult with a licensed electrician before

proceeding.

Use a level (not included) to adjust mounting plate

(B) parallel with floor and ceiling as needed, then

tighten machine screws (BB) completely to secure

mounting plate (B).

CAUTION: Make sure the outlet box can

support 35 lbs. hanging weight. Use metal outlet

box; plastic outlet boxes are not recommended.

4a.

Lowes.com/

ortfolio

ASSEMBLY INSTRUCTIONS

Outlet Box

Washer

Hardware Used

Machine Screw

x 2