Installation Guide
Remove mounting plate (B) from fixture (A) by
removing mounting plate screws (D) from the edges
of the fixture (A). Save mounting plate screws (D)
for later use.
5
E
3
Attach mounting plate (B) to outlet box (not
included) using the existing washers and outlet box
screws or the machine screws (BB). Note: If the
outlet box screws required for your outlet box are of
a different size than the machine screws (BB),
consult with a licensed electrician before
proceeding.
Use a level (not included) to adjust mounting plate
(B) parallel with floor and ceiling as needed, then
tighten machine screws (BB) completely to secure
mounting plate (B).
CAUTION: Make sure the outlet box can
support 35 lbs. hanging weight. Use metal outlet
box; plastic outlet boxes are not recommended.
4
3.
4.
Lowes.com/
p
ortfolio
A
B
ASSEMBLY INSTRUCTIONS
Outlet Box
Washer
B
BB
BB
Washer
D
D
Hardware Used
Machine Screw
x 2
BB