Installation Guide

ASSEMBLY INSTRUCTIONS
7
7.
Attach fixture (A) to mounting plate (C) using the
mounting plate screws (D) previously removed
(Step 3, Page 5). Note: Fixture (A) can be
installed with the sockets facing either up or down.
NOTE: Before tightening mounting plate screws
(D) completely, use level (not included) to check
fixture (A) -- adjust if necessary.
Outlet
Box
Install three standard-base bulbs (not included).
Use 60-watt max. incandescent bulbs or
halogen/CFL/LED equivalent.
WARNING: When replacing bulbs, please
allow bulbs and fixture to cool down before
touching.
Restore power and test fixture (A).
If lights do not function, please refer to
TROUBLESHOOTING on the following page.
8.
9.
7
C
A
D
D
8
B
Glass Shade
(representative
only)
A
Remove socket rings (B) from sockets of fixture
(A). Attach glass shades (sold separately) to
sockets, securing with socket rings (B).
CAUTION: Do not overtighten socket rings (B)
as glass may crack or break.
9
Bulb
(representative
only)
A
Socket