Installation Guide

ASSEMBLY INSTRUCTIONS

Prepare wires by stripping 3/4 in. of insulation from

wire ends using wire strippers (not included).

Connect BARE/GREEN ground wire from outlet

box to BARE ground wire from fixture (A) with wire

connector (AA). Connect WHITE wire from fixture

(A) to WHITE wire from outlet box using existing

wire connector or wire connector (AA). Connect

BLACK wire from fixture (A) to BLACK wire from

outlet box using existing wire connector or wire

connector (AA).

NOTE: Screw wire connectors (AA) on in a

clockwise direction.

WARNING: Never connect ground wire to

WHITE or BLACK power supply wires.

WARNING: To reduce the risk of fire, electrical

shock or personal injury, wire connectors (AA) are

designed to accept only one 12-gauge house wire

and two lead wires from the light fixture. If your

house wire is larger than 12-gauge or there is more

than one house wire to connect to the

corresponding fixture lead wires, consult an

electrician for the proper size wire connectors to

use.

Outlet Box

Hardware Used

Wire Connector

x 3

Wrap electrical tape (not included) around each

individual wire connector (AA) down to the wire.

WARNING: Make sure no bare wire or wire

strands are visible after making connections.

Outlet

Box

BLACK

WHITE

BARE/

GREEN