Installation Guide

ASSEMBLY INSTRUCTIONS
5
Remove mounting plate (C) from fixture (A) by
removing mounting plate screws (D) from the
edges of the fixture (A).
Save mounting plate screws (D) for later use.
3
Attach mounting plate (C) to outlet box
(not included) using existing washers and
outlet box screws or the machine screws (BB).
NOTE: If the outlet box screws required for
your outlet box are of a different size than the
machine screws (BB), consult a licensed
electrician before proceeding.
Tighten machine screws (BB) to secure
mounting plate (C).
CAUTION: Make sure the outlet box can
support 35 lbs. hanging weight. Use metal
outlet box; plastic outlet boxes are not
recommended.
4
3.
Outlet Box
4.
A
C
D
D
C
Hardware Used
Machine Screw
x 2
BB
Washer
BB
Washer
BB