Installation Guide

8
2b
BB
A
2b. Acrylic and berglass installation: Place
xed panel jamb (A) back into place. Tighten
1-9/16 in. screws (BB) with Phillips screwdriver
into each drilled hole.
Hardware Used
1-9/16 in. Screw
BB
x 4
ASSEMBLY INSTRUCTIONS
3
C
3. Insert xed panel (C) into xed panel jamb (A)
slot, making sure that the xed panel (C) is level.
If xed panel (C) is not level, install spacers
(QQ) on bottom as needed. Starting at the
bottom, place gasket (B) inside shower between
xed panel (C) and xed panel jamb (A). Using a
knife, cut remaining gasket (B) on top.
B
Top
View
QQ
4
4. Insert rail cap (JJ) on left side of top rail (F) and
wall bracket cover (II) on the right side. Insert
track nut (DD) and screw guide (EE) into both
front holes on top rail (F).
F
A
II
EE
DD
JJ
Hardware Used
x 2
Hardware Used
QQ
Spacer
x 2
DD
Track Nut
x 2
EE
Screw Guide
x 1
II
Wall Bracket Cover
x 1
JJ
Rail Cap