Installation Guide

8
9.
Outlet Box
9
A
C
B
Canopy
CARE AND MAINTENANCE
• Shut off main power supply. Wipe fixture with soft, damp cloth. Use window cleaner to clean glass.
Do not use an abrasive cleaner on glass or fixture.
• Total wattage for this fixture is 7 watts; do not attempt to replace the LEDs.
C
Carefully arrange excess wiring and wire
connectors (AA) within canopy of fixture (A).
Align holes in edge of canopy of fixture (A) with
screw holes at ends of mounting strap (B).
Secure fixture (A) with mounting strap screws (C)
previously removed (Step 3, page 5).
ASSEMBLY INSTRUCTIONS
10.
10
A
Restore power and test fixture (A).
If light does not function, please refer to
TROUBLESHOOTING below.