Installation Guide

7
ASSEMBLY INSTRUCTIONS
Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire.
WARNING: Make sure no bare wire or wire
strands are visible after making connections.
8.
Hardware Used
Wire Connector x 3
AA
Connect BARE/GREEN ground wire from outlet box
to mounting strap (B) green screw. Connect ground
wire from mounting strap (B) to GREEN STRIPE
ground wire from fixture using wire connector (AA).
Connect clear wire with WHITE STRIPE from fixture
(A) to BLACK wire from outlet box using existing
wire connector or wire connector (AA). Connect
CLEAR wire from fixture (A) to WHITE wire from
outlet box using existing wire connector or wire
connector (AA).
NOTE: Screw wire connectors (AA) on in a
clockwise direction.
WARNING: Never connect BARE/GREEN
ground wire to WHITE or BLACK power supply
wires.
WARNING: To reduce the risk of fire, electrical
shock or personal injury, wire connectors (AA)
provided with this light fixture are designed to accept
only one 12-gauge house wire and two lead wires
from the light fixture. If your house wire is larger than
12-gauge or there is more than one house wire to
connect to the corresponding fixture lead wires,
consult an electrician for the proper size wire
connectors to use.
7.
B
AA
AA
A
AA
7
Outlet Box
CLEAR Fixture Wire
with WHITE STRIPE
CLEAR
Fixture Wire
WHITE Wire
from Outlet Box
BARE/GREEN
Wire from
Outlet Box
Fixture Wire
with GREEN
STRIPE
BLACK Wire
from Outlet Box
AA
AA
Outlet Box
8
AA