Installation Guide

Remove socket ring (B) from socket on fixture
(A). Attach glass shade (not included) with
socket ring (B).
NOTE: Do not overtighten socket ring (B) as
glass may crack or break.
6
ASSEMBLY INSTRUCTIONS
6
7A
7.
7
Socket
Glass Shade
[sold separately]
Install one standard-base 60-watt max.
incandescent bulb (not included) or CFL/LED
equivalent. *Maximum wattage for fixture (A) is
60 watts--PLEASE NOTE WARNINGS
BELOW.
WARNING: If the maximum wattage for the
recessed light fixture in which you are installing
the fixture (A) is less than 60 watts, you may
only use the maximum wattage indicated on
that recessed light fixture. Failure to do so may
result in fire or electrical shock.
WARNING: To reduce the risk of fire or
electrical shock, do not use a bulb with a higher
wattage than 60 watts even if the recessed light
fixture into which you are installing the fixture
(A) may indicate that it can accept a higher
maximum wattage.
IMPORTANT: When replacing bulb, please
allow bulb and glass shade to cool before
touching.
8
Restore power and test fixture (A).
If light does not function, refer to the
TROUBLESHOOTING on the next page.
8.
Glass Shade
[sold separately]
Bulb
8
A
A
B