Installation Guide

5
PREPARATION
CAUTION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly (not included): Flathead Screwdriver, Phillips Screwdriver, Wire Strippers,
Drill, 5/64 in. or 5/16 in. Drill Bit (wood or drywall), Hammer, Pencil, Pliers, Wire Cutters, Safety
Glasses, Stepladder, Electrical Tape, Template
Helpful Tools (not included): Soft Cloth, Level
ON
OFF
ON
OFF
Turn off circuit breakers and wall switch to
the fixture supply line leads.
DANGER: Failure to disconnect power
supply prior to installation may result in
serious injury or death.
1
1.
• TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by
removing the fuse (or switching the circuit breaker off).
• If you are not sure the lighting system has a grounding means, DO NOT attempt to install this fixture.
Contact a qualified, licensed electrician for information regarding the proper grounding methods as
required by the local electrical code in your area.
• All fixtures must be mounted to an outlet box that is supported by the building structure.
• Do NOT tamper with or attempt to repair LED component of fixture. The light source is designed for
this specific application and should not be serviced by untrained personnel. If any servicing is
required, call our customer service department.
• Total wattage for this fixture is 23.3 watts; do not attempt to replace the LEDs.
• Due to the weight of this fixture, it is advisable to seek the help of another person.
SAFETY INFORMATION
INITIAL INSTALLATION