Installation Guide

WARRANTY
Printed In China
JMLI1810
The distributor warrants all of its lighting fixtures against defects in materials and workmanship for five (5)
years from the date of purchase. If within this period the product is found to be defective, take a copy of
the bill of sale as a proof of purchase and the product in its original carton to the place of purchase. The
distributor will, at its option, repair, replace or refund the purchase price to the consumer. All costs of
installation and removal of the fixture is the responsibility of the consumer. This warranty does not cover
fixtures becoming defective due to misuse, accidental damage or improper handling and/or installation and
specifically excludes liability for direct, incidental or consequential damages. As some states do not allow
exclusions of limitations on an implied warranty, the above exclusion and limitation may not apply. This
warranty gives you specific rights and you may also have other rights which may vary from state to state.
TROUBLESHOOTING
WARNING: Before beginning work, shut off the power supply to avoid electrical shock.
CARE AND MAINTENANCE
• Wipe fixture with soft, damp cloth. Do not use an abrasive cleaner on fixture.
OPERATING INSTRUCTIONS
A
1. Tapping the touch sensor (B) on fixture (A) turns
light ON and OFF.
2. Pressing the touch sensor (B) for 3 seconds dims
the light.
Light does not come on
initially or no longer
comes on.
1. Power is OFF.
2. Faulty connection.
3. LED component is not working
properly.
4. Fixture is not plugged in.
1. Make sure power supply is ON.
2. Repeat Step 4. Check wiring and
all connections.
3. Contact Customer Service.
4. Plug fixture into outlet.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
B
Fuse blows out or
circuit breaker trips.
1. Crossed wires.
2. Power wire is grounding out.
1. Check wiring.
2. Check all connections.
11