Installation Guide

HARDWIRE INSTALLTION
7
7.
8.
Hang fixture (A) using the keyhole slots on the
back of fixture (A).
8
Keyhole
Slot
A
10
Attach the wire box cover to outlet box (not
included) using outlet box screws or the
machine screws (DD). NOTE: If the outlet
box screws required for your outlet box are
of a different size than the machine screws
(DD), consult a licensed electrician before
proceeding. Tighten machine screws (DD) to
secure wire cover box.
CAUTION: Make sure the outlet box
can support 35 lbs. hanging weight. Use
metal outlet box; plastic outlet boxes are not
recommended.
Hardware Used
Machine Screw
x 2
DD
DD
A
Wire box
cover