Use & Care Guide

5
ASSEMBLY INSTRUCTIONS
Stem
FF
B
GG
Pass center hole of ceiling canopy on the socket
assembly (B) over the nipple (FF). Secure by
threading the stem (GG) onto the nipple (FF).
Tighten until the ceiling canopy is flush against
the ceiling.
664
4.
AA
BB
3 . Attach ground fixture wire to either the green
ground screw (AA) on crossbar (A) or to the
ground wire in the outlet box (usually GREEN
or BARE). If attaching fixture ground wire to
the crossbar (A), it is imperative the outlet
box in your home be properly grounded.
Connect the neutral WHITE or RIBBED side
fixture wire to the neutral usually WHITE wire
from the outlet box. Connect the hot BLACK
or SMOOTH side fixture wire to the hot
usually BLACK wire from the outlet box.
Fasten wires together with a wire
connector (BB) and tightly wrap wire connector
(BB) with electrical tape (not included).
3
White Wire
From Outlet Box
Black Wire
From Outlet Box
Bare, or Green
Ground Wire
Bare, or Green
Fixture Ground Wire
From Outlet Box
Bare, or Green
Ground Wire
From Outlet Box
White or
Ribbed Side
From Fixture
From Fixture
Black or
Smooth Side
OR
BB
AA
Hardware Used
x 1
Green
Ground
Screw
GG
Hardware Used
x 1
x 3
Wire
Connector