Installation Guide

6
CARE AND MAINTENANCE
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives
to clean fixture as they may damage the finish.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Bulbs will not light. 1. Bulb is burned out.
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.
1. Replace light bulb.
2. Make sure power supply is on.
3. Check wiring.
4. Test or replace the switch.
Fuse blows or the
circuit breaker trips
when light is turned
on.
Crossed wires or power wire is
grounding out.
Check wire connection.
ASSEMBLY INSTRUCTIONS
II
JJ
Bulb
Socket
666
Lowes.com
6. Install the bulbs (not included). Use 100-watt max.
standard-base incandescent bulbs or 13-watt max.
standard-base spring self-ballasted CFLs.