Installation Guide

7
STYLE SELECTIONS
TM
LOCKING ENGINEERED HARDWOOD FLOORING — FLOOR INSTALLATION INSTRUCTIONS
2018_06_SS_LEWF_LOW_INST_WAR
WARRANTY CONDITIONS
The owner/installer assumes all responsibility for final inspection of product quality. Examine flooring for color,
finish and style prior to installation. If material is unacceptable, contact the seller immediately. Wood is a natural
product and contains characteristics such as variations in color, tone and graining. Flooring is manufactured in
accordance with industry standards, which allows manufacturing and natural deficiency tolerances up to 5% of
the total installation. Installer should work from minimum of 3 cartons at the same time to ensure good color and
shade blend. The installer must use reasonable selectivity and hold out or cut off piece with deficiencies. DO NOT
install undesirable pieces. Flooring warranties DO NOT cover materials with visible defects once they are installed.
Installation is acceptance of product quality.
It is the responsibility of the installer and owner to ensure that jobsite, environmental, subfloor and subsurface
conditions involved meet or exceed all requirements as outlined in installation instructions prior to installation.
Manufacturer declines all responsibility for product performance or installation failure due to subfloor, substrate or
environmental deficiencies or jobsite conditions.
Manufacturer warrants the factory applied finish will not wear through or will not lack finish adhesion as a result of
normal use. An additional structural warranty may be applicable to this engineered hardwood. See the complete
product warranty for details.
For service under this warranty please contact your local Lowe’s store. Describe the problem and in many cases,
they can provide you with a solution.
For installation, maintenance and technical questions please call [phone].
StyleSelections locking engineered hardwood flooring is manufactured by
Unilin Flooring North America LLC
550 Cloniger Drive
Thomasville, NC 27360