Installation Guide

ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
Hardware Used
Hardware Used
1
2
3
Cap nut
Machine screw
Crossbar
Crossbar
x 2
x 2
x 1
x 3
x 2
x 1
x 1
1. Remove cap nuts (AA) from the preassembled
mounting screws on crossbar (DD). Attach
crossbar (DD) to the outlet box (not included) with
machine screws (CC). Note: The mounting screws
should protrude away from the outlet box.
3. Attach wire nuts (BB). Tape wire nuts (BB)
and wires together.
Wire nut
Cap nut
Tool
B
AA
B
CC
B
DD
B
B
B
BB
AA
EE
BB
ASSEMBLY INSTRUCTIONS
4
5. Remove socket rings (B) with tool (EE). Install
glass shades (C) over sockets of xture (A), then
secure with socket rings (B) by using tool (EE).
5
6
4. Place xture (A) onto mounting screws protruding
from crossbar (DD). Secure with cap nuts (AA).
Note: The xture (A) can be installed with the
sockets facing up or down.
6. Install light bulbs (not included). Use three
60-watt max. standard-base bulbs or three
13-watt standard-base CFL bulbs.
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not
included), black to black (power) and white to
white (neutral). Attach copper wire to ground
wire. Helpful hint: If necessary, attach copper
ground wire to grounded outlet box.
AA
A
A
C
B
EE
AA DD
CC
DD
Lowes.com Lowes.com
4 5
B
DD
or