Installation Guide
ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
1
2
3
4
Crossbar
x 1
x 3
x 2
4. Attach wire nuts (BB). Tape wire nuts (BB)
and wires together.
Wire nut
Cap nut
B
DD
B
B
BB
AA
BB
ASSEMBLY INSTRUCTIONS
5
6
6. Install bulbs (C).
2. Screw the ceiling plate (A) onto the î‚¿xture (B).
3. Strip 3/4 in. of insulation from wire ends. Twist
stripped ends together with pliers (not included),
black to black (power) and white to white (neutral).
Attach copper wire to ground wire.
Helpful hint: If necessary, attach copper ground
wire to grounded junction box.
4 5
5. Attach ceiling plate (A) to crossbar (DD).
Secure with cap nuts (AA).
Lowes.comLowes.com
AA
A
BB
C
CC
DD
Hardware Used
Cap nut
Machine screw
Crossbar
x 2
x 2
x 1
1. Remove cap nuts (AA) from the preassembled
mounting screws on crossbar (DD). Attach
crossbar (DD) to the outlet box (not included) with
machine screws (CC). Note: The mounting screws
should protrude away from the outlet box.
B
AA
B
CC
B
DD
AA
A
DD