Installation Guide

9
ASSEMBLY INSTRUCTIONS
8.
Attach power supply inside canopy (D) with
double-sided adhesive (not included).
4
8
D
Power Supply
Adhesive
9.
WARNING: Do not remove preattached wire
connectors from red and black wires inside the
canopy.
Connect BARE/GREEN ground wire from outlet box
to BARE ground wire from canopy (D) with wire
connector (AA). Connect WHITE wire from power
supply to WHITE wire from outlet box using existing
wire connector or wire connector (AA). Connect
BLACK wire from power supply to BLACK wire from
outlet box using existing wire connector or wire
connector (AA).
NOTE: Screw wire connectors (AA) on in a clockwise
direction.
WARNING: Never connect ground wire to
WHITE or BLACK power supply wires.
WARNING: To reduce the risk of fire, electrical
shock or personal injury, wire connectors (AA) are
designed to accept only one 12-gauge house wire
and two lead wires from the light fixture. If your
house wire is larger than 12-gauge or there is more
than one house wire to connect to the corresponding
fixture lead wires, consult an electrician for the
proper size wire connectors to use.
Hardware Used
Wire Connector
x 3
AA
4
9
D
Outlet Box
BLACK
WHITE
AA
AA
BARE/
GREEN
AA
Wires