Installation Guide

11.
Align holes in edge of canopy (D) with holes on
edge of mounting plate (B). Attach canopy (D) to
mounting plate (B) using the mounting plate
screws (C) previously removed (Step 3, Page 7).
12.
ASSEMBLY INSTRUCTIONS
12
A
Restore power and test fixture (A).
If light (A) does not function, please refer to
TROUBLESHOOTING on the next page.
11
D
C
C
10.
Wrap electrical tape (not included) around
each individual wire connector (AA) down to
the wire. Push wire connectors (AA) gently
back into outlet box. Carefully push excess
wiring into outlet box.
WARNING: Make sure no bare wire or
wire strands are visible after making
connections.
10
10
B
Outlet Box
AA
AA
AA