Installation Guide

11
Lowes.com
10. Lift insert (P) carefully into the back of the unit and
center in the insert opening. Do not drag insert (P)
across front base (A) as it may scratch the unit.
Connect the insert support bar (K) to the left
partition (I) and right partition (J) using bolts (AA)
and washers (BB).
11. Assembly is now complete. With the help of
another person, move the unit to its nal location
and use the preassembled levelers as needed to
ensure the unit’s stability.
10
11
K
Hardware Used
AA
Bolt
x 2
BB
Washer
x 2
WARNING: Be sure to read all safety information prior to installing the insert (P). Insert (P) should be
installed in the replace as close to the nal position as possible; two people are recommended for this
step.