Installation Guide

CARE AND MAINTENANCE

OPERATING INSTRUCTIONS

Clean periodically with a soft cloth and glass cleaner. Avoid spraying glass cleaner directly onto mirror. Avoid abrasive

cleaners and harsh chemicals as they may damage the surface of the products.

LIMITED ONE YEAR WARRANTY

If this product fails due to a defect in materials or workmanship at any time during the rst ONE year of ownership, the

manufacturer will replace it free of charge, postage-paid at their option. This warranty does not cover products that have

been abused, altered, damaged, misused, cut or worn. This warranty does not cover use in commercial applications. Use

only manufacturer-supplied genuine warranty repair replacement parts to repair this mirror. Use of non-genuine repair parts

will void your warranty. The manufacturer DISCLAIMS all other implied or express warranties including all warranties of

merchantability and/or tness for a particular purpose. As some states do not allow exclusions or limitations on an implied

warranty, the above exclusions and limitations may not apply. This warranty gives you specic legal rights, and you may

have other rights that vary from state to state.

This warranty is limited to the replacement of defective parts only. Labor charges and/or damage incurred during installation,

repair, replacement as well as incidental and consequential damages connected with the above are excluded. Any damage

to this product as a result of neglect, misuse, accident, imporper installation or use other than the purpose SHALL VOID

THIS WARRANTY.

Shipping costs for return product as part of a claim on the warranty must be paid for by the customer.

Inquiries regarding warranty claims can be directed to 1-877-319-3757 8 a.m. - 6 p.m., EST, Monday - Thursday,

8 a.m. - 5 p.m., EST, Friday.

1. Touch the sensor button to turn ON the light.

2. Touch and hold the sensor button to dim the light.

3. When desired brightness is achieved, release the sensor button.

4. Touch the sensor button to turn off the light.

ASSEMBLY INSTRUCTIONS

5. Follow all local electrical codes and consult a qualied electrician.

Check that the black, white and green wires are all exposed from

the mirror. Make sure the power in the house is off. Connect the

white wire on the mirror to the house white wire. Connect the black

wire on the mirror to the black house wire. Connect the green

ground wire on the mirror to the appropriate house ground.

Mirror

House

black

white neutral

ground

live

white

green green

6. Insert the screw heads into the keyholes on the back of the

mirror frame, then carefully let the mirror drop down so that

the screw heads move into the small sections of the keyholes,

securing the mirror in place.

Printed in China