Installation Guide

6
IS6923
Hardware Used
Hardware Used
1. Fasten 1 support rail (F) to the top of the lower side
panels (G) using large screws (H1), as shown.
NOTE: Support rail (F) can be fastened in the back
location according to your preference.
2. Place the bottom assembly in desired location, then
install a support rail (F) with the nished edge facing
up using large screws (H1), as shown.
NOTE: The support rail (F) may be adjusted by using
different holes in the lower side panels (G).
1
2
3
G
Large Screw
x 4
H1
H1
Hardware Used
3. Fasten the magnet (H9) to 1 top shelf (A) using
the magnet screws (H10).
Magnet
x 1
H9
Magnet Screw
x 2
H10
ASSEMBLY INSTRUCTIONS
H1
unnished edge
G
G
A
G
unnished edge
Allen Wrench
x 1
H2
Large Screw
x 4
H1
Allen Wrench
x 1
H2
F
H9
H10
unnished edge
back
F