Installation Guide

5
ASSEMBLY INSTRUCTIONS
3. Attach the ground fixture wire to either green ground screw
(BB) on crossbar (EE) or to the ground wire in the outlet
box (usually GREEN or BARE). If attaching to the ground
wire in the outlet box, fasten together with a wire connector
(CC) and tightly wrap with electrical tape (not included).
Connect the neutral (WHITE or IDENTIFIED side) fixture
wire to the neutral (usually WHITE) wire from the outlet
box. Fasten wires together with a wire connector (CC) and
tightly wrap wire connector (CC) with electrical tape.
Connect the hot (BLACK or PLAIN side) fixture wire to the
hot (usually BLACK) wire from the outlet box. Fasten wires
together with a wire connector (CC) and tightly wrap wire
connector (CC) with electrical tape.
4. Place fixture body (A) onto the crossbar (EE),
securing from the top and bottom with the
mounting screws (II). Using a tissue or glove (not
included), install bulb (DD) into each socket on
fixture body (A). Caution: Oil from fingers will
decrease the life of the bulb (DD).
IT IS IMPORTANT THE OUTLET BOX IN YOUR HOME
IS PROPERLY GROUNDED.
HARDWARE USED
II
Mounting Screws x 2
CC
BB
DD
Bulb x 3
HARDWARE USED
BB
CC
Green Ground Screw x 1
EE
Wire Connector x 3
3
WHITE WIRE
FROM OUTLET BOX
WHITE OR IDENTIFIED
FIXTURE WIRE
BLACK WIRE
FROM OUTLET BOX
PLAIN OR BLACK
FIXTURE WIRE
BARE OR GREEN BARE OR GREEN
GROUND WIRE
FROM OUTLET BOX
FIXTURE GROUND
WIRE
Lowes.com
4
DD
II
A
EE