Installation Guide

VANITY INSTALLATION INSTRUCTIONS
7
7. Apply silicone caulk (not included) to unpolished
side and bottom of backsplash (C). Position
backsplash (C) on top (B) and against wall.
Clean any excess caulk before allowing
to dry.
Assembly is now complete. Install desired
faucet and drain assemblies (neither included)
per the manufacturers’ instructions to
complete the installation.
6. If you need to adjust the tip-out door, do so in the following manner.
To adjust tip-out door left or right, loosen screws (a) on both hinges, adjust tip-out door, and
retighten screws.
To adjust tip-out door up or down, turn screws (b) on both hinges, in or out.
To adjust tip-out door in or out, loosen screws (c) on both hinges, adjust tip-out door, and
retighten screws.
MIRROR INSTALLATION INSTRUCTIONS
1. Measure the distance between the holes in the
mounting hangers (H) on the back of the mirror (G).
7
2
2
B
C
1
6
2
2
2
2
2
2
3
a
1
a
1
C
3
C
1
1
b
1
G
H
H
H
H