Installation Guide

7
10. Slace the remaining shelf (A) over the top rods
(B). Push down until the corners fit securely over
each spacer (D).
10
B
C
A
CARE AND MAINTENANCE
Periodically check the casters (sold separately), and spacers to be sure they are secure.
Never use abrasive or acid-based cleaners on the shelf rack.
Clean shelves and rods with a solution of mild detergent and water. Use a soft cloth or sponge
to wipe parts. Rinse and dry thoroughly.
Keep surfaces dry and clean for a longer lasting finish.
•
•
•
•
11. To prevent the unit from tipping over, secure it to a
wall in the following manner: Drill a hole in the wall
using a 1/4 in. drill bit (not included). Insert the
plastic anchor (BB) into the hole. Insert the screw
(CC) through the washer (AA) then through the back
of the top shelf wire and into the plastic anchor (BB)
as shown. Be sure unit is secure and doesn’t
wobble or tip over.
11
AA
BB
CC