Installation Guide

ASSEMBLY INSTRUCTIONS

Screw the top rods (B) onto the threaded ends of

the bottom rods (C). Be sure the connection is

secure.

Attach two spacers (D) at about the third groove

(from the foot levelers) on each bottom rod (C)

assembly. Note: Be sure the arrows on the spacers

point upward.

Place the bottom rods (C) through the corner holes

of one shelf (A). Push the shelf (A) down until the

corners fit securely over each spacer (D). Hint: lf the

corners do not fit securely over each spacer, make

certain the arrows on the spacers (D) point upward.