Installation Guide

VANITY INSTALLATION INSTRUCTIONS

Note: A

t this stage it may be easier to install the faucet

and drain kit (not included) to top (B) per the

manufacturer’s instructions.

WARNING

Vanity (A) MUST be secured to wall.

Note: Clean area where the vanity (A) will be

permanently located prior to beginning installation,

ensuring the vanity (A) will not interfere with any

water supply and drain lines once mounted.

With the help of another adult,

carefully place

vanity (A) against the wall in its final location.

From inside vanity (A), drill hole through vanity

mounting area and into wall studs. Using

mounting hardware (not included) appropriate

for your installation site, secure vanity (A) to

wall stud. If possible, secure vanity (A) to

two wall studs for increased stability.

Note: Use preassembled levelers on legs of

vanity (A) to level the item. Twisting the

levelers counterclockwise will increase the

height of vanity (A), twisting them clockwise

will decrease it.

Apply stain free silicone or latex adhesive (not included)

to the top edge of vanity (A). With the help of another

adult, gently lower top (B) onto the vanity (A). Wipe

away any excess adhesive with a soft cloth, and wait

approximately 24 hours for it to dry.