Installation Guide

INSTALLATION INSTRUCTIONS

Apply silicone caulk (not included) to the top edge

of vanity (A). With the help of another adult, gently

lower top (B) onto the vanity (A). Wipe away any

excess caulk with a soft cloth, and wait approximately

24 hours for it to dry.

5. Clean bottom surface of sink (D). Following

silicone sealant’s manufacturer directions, apply

a uniform bead of silicone sealant (not included)

around bottom outer ring of sink (D). Lower sink

(D) onto vanity top. Align sink’s bottom drain

hole with inner hole of vanity top.

Note: Make sure sink (D) is completely dry

before applying sealant.